Print detached from the build head while printing

THE PROBLEM:

Although your job got off to a good start, sometime before it completed, the entire print detached from the build head and fell into the resin tray.  

MOST LIKELY CAUSE SOLUTION
There wasn't a large enough surface area where the print makes contact with the build plate to resist the shearing forces in the peeling and rotation process.   Increase the surface area between your model and the build plate by modifying the geometry and adding a larger base to your model, or adding more supports in the print preparation process.

If you need additional help with this issue, submit a support ticket.

Have more questions? Submit a request