► IMPORT THE MODEL
Import the STL or OBJ you would like to print by clicking on the import button and selecting your model then clicking open. You can import multiple models at the same time. In this example, we're going to print a large ring made from two hornbill birds beaks.
When you import your model, depending on its orientation, it may be too large for the build volume and you'll see a warning dialog box. Unless you want to change the units, press OK. We'll adjust the orientation in the next step, so the model fits in the build volume.
If the model has issue with the mesh it will be red, we'll fix the issues with mesh after we have arranged the model.
Continue on to Orient the Model...